Licence Details

Ampol Refineries (NSW) Pty Ltd, 2 Solander St, Kurnell, NSW, 2231, EPL # 837 (now operating as Ampol Kurnell Terminal)

The data in this section of the Ampol Public website is provided, in accordance with the Protection of the Environment Operations Act 1997 (POEO Act) Section 66(6) and the NSW EPA Guideline “Requirements for Publishing Pollution Monitoring Data”.

Ampol Refineries (NSW)’s Environment Protection Licence (EPL) has a reporting period that starts each year on 2nd May and runs until 1st May the following year. Once all the monitoring sample results for the monthly reporting period have been received, the monthly report is finalised and uploaded to the Ampol Public website.

The EPL describes the type and location of the various monitoring points, pollutants and monitoring frequency.  The specific monitoring details can be found by clicking on the following: 

Kurnell Terminal

The NSW EPA Public Register can be found by clicking on the following:

NSW EPA Public Register

The Kurnell Terminal now operates as a fuel import and distribution Terminal. There is no EPL requirement to undertake air monitoring.

The sections below provide monthly, quarterly and yearly summaries of the obtained data. 

Historical Kurnell Data

Ampol has prepared this information in good faith exercising all due care and attention, but no representation or warranty, express or implied is made as to the relevance, accuracy, completeness or fitness for purpose of this information in respect of any particular user's circumstances. Provision of this information does not constitute an opinion or interpretation by Ampol of the information and users of this information should satisfy themselves concerning its application to, and where necessary seek expert advice in respect of, their situation. Under no circumstances will Ampol be liable for any loss or damage however caused, resulting from your use of or access to, or inability to use or access, this information.

To request monitoring data, please click here and ensure that you select "Customer Enquiries" under and indicate that you require Banksmeadow Monitoring Data.